5.
Remove one screw cover
(3)
from the middle rear of the computer bottom.
The screw covers and the computer rear feet are included in the Rubber Kit, spare part number
792782-001.
6.
Remove the 13 Phillips PM2.5×6.0 screws that secure the keyboard/top cover to the bottom cover.
7.
Turn the computer right side up, with the front toward you.
8.
Open the computer.
CAUTION:
Do not completely separate the keyboard/top cover from the bottom cover in the next step.
There are ribbon cables connecting the keyboard/top cover to the system board that can be damaged if
too much separation is achieved.
9.
Lift the front edge
(1)
of the keyboard/top cover until it
(2)
separates from the bottom cover.
10.
Disconnect the following cables from the system board:
(3)
: Battery cable
(4)
: Touchpad cable
(5)
: Keyboard cable
(6)
: Power button board cable
Component replacement procedures
25
