manualshive.com logo in svg

HP StorageWorks SR2122, User Manual

The HP StorageWorks SR2122 is a high-performance storage product designed to meet your data storage needs. Discover its full capabilities by accessing the comprehensive User Manual, available for free download at our website. Unlock the full potential of your device with this essential manual, accessible at manualshive.com.

Share
Download
background image

Configuring FCIP

140

IP Storage Router SR2122-2 User Guide

TCP Client

If the peer FCIP instance is configured as a TCP client, use the following 
procedure to configure the FCIP instance with the IP address and TCP server 
protocol of the peer. 

1.

enable

 — Enter Administrator mode

2.

fcip fcip2 destination tcpserver 

10.1.0.47

 — Assign the 

IP address of the peer FCIP instance and configure the protocol.

For example, the IP address of the peer is in dotted quad notation 

10.1.0.47

 

and connection is made using TCP protocol with fcip2 acting as a TCP server. 
The TCP server will listen for a TCP connection attempt from its peer which 
must be configured as a TCP client.

Note:  

If you are configuring two FCIP instances on the SR2122-2, do not configure 

both instances as TCP servers. Instead, configure both instances as TCP clients or one as 

a TCP server and the other as a TCP client. If both instances have to be TCP servers then 

they should use different TCP ports.

See the 

IP Storage Router 2122-2 Command Line Interface Reference Guide

 

for more information about the 

fcip destination

 command.

TCP Server

If the peer FCIP instance is configured as a TCP server, use the following 
procedure to configure the FCIP instance with the IP address and TCP client 
protocol of the peer. 

1.

enable

 — Enter Administrator mode

2.

fcip 

fcip2

 destination tcpclient 

10.1.0.46

 — Assign the 

IP address of the peer FCIP instance and configure the protocol.

For example, the IP address of the peer is in dotted quad notation 

10.1.0.46 

and connection is made using TCP protocol with fcip2 acting as a TCP client. 
The TCP client will try to initialize the TCP connection with its peer which 
must be configured as a TCP server.

See the 

IP Storage Router 2122-2 Command Line Interface Reference Guide

 

for more information about the 

fcip destination

 command.

Summary of Contents for StorageWorks SR2122



















































































































































































































































Reviews:

No comments

Related manuals for StorageWorks SR2122

D-Link DSL-504T Manual preview
DSL-504T
Brand: D-Link Pages: 99
D-Link DI-804V Datasheet preview
DI-804V
Brand: D-Link Pages: 5
D-Link DES-1210-08P Manual preview
DES-1210-08P
Brand: D-Link Pages: 15
D-Link AirPro DWL-6000AP Manual preview
AirPro DWL-6000AP
Brand: D-Link Pages: 65
Tyco Electronics 8 Port 10/100Mbit/s Ethernet Smart Switch with Fibre Uplink Product User Manual preview
8 Port 10/100Mbit/s Ethernet Smart Switch with Fibre Uplink
Brand: Tyco Electronics Pages: 18
Paradyne Hotwire 5446 Notice preview
Hotwire 5446
Brand: Paradyne Pages: 2
Paradyne Hotwire 6381 Installation Instructions Manual preview
Hotwire 6381
Brand: Paradyne Pages: 20
Paradyne Hotwire 6381 Upgrade Instructions preview
Hotwire 6381
Brand: Paradyne Pages: 2
Zhone Hotwire 6381 Quick Installation Instructions preview
Hotwire 6381
Brand: Zhone Pages: 2
Paradyne COMSPHERE 6800 Series Multiplexer Management And Configuration Manual preview
COMSPHERE 6800 Series
Brand: Paradyne Pages: 155
Paradyne COMSPHERE 6800 Series Communications Products Support Configuration Manual preview
COMSPHERE 6800 Series
Brand: Paradyne Pages: 44
IBM TotalStorage SAN16M-R SAN Installation And Service Manual preview
TotalStorage SAN16M-R SAN
Brand: IBM Pages: 116
Netopia 3346-ENT Getting Started Manual preview
3346-ENT
Brand: Netopia Pages: 38
Allied Telesis AT-8000C Declaration Of Conformity preview
AT-8000C
Brand: Allied Telesis Pages: 1
Ruckus Wireless MediaFlex NG Quick Installation Manual preview
MediaFlex NG
Brand: Ruckus Wireless Pages: 2
Rosewill RNX-N150RT Quick Installation Manual preview
RNX-N150RT
Brand: Rosewill Pages: 10
Idis DR-1508P Operation Manual preview
DR-1508P
Brand: Idis Pages: 85
Sans Digital ELITENAS EN104L+(B) Quick Installation Manual preview
ELITENAS EN104L+(B)
Brand: Sans Digital Pages: 9

Brands by name

Popular brands

Load more brands