Configuration Setup
37
NAS e7000 v2 Quick Start Guide
Procedure
To initialize the NAS e7000 v2 using the WebUI configuration application:
Caution:
Do not power up the NAS device until steps 1 through 6 are
completed.
1. Connect the Ethernet cables to the respective network ports of the
NAS e7000 v2 and the corresponding network segments, in accordance with
the information in the “Configuration Information” section in Chapter 2.
2. See
and
for the locations of the network ports on the
NAS e7000 v2.
Figure 6: NAS e7000 v2 Ethernet connectors
1
2
4
3
