Installing and Configuring Device Drivers
29
FCA2684/FCA2684DC PCI-X Host Bus Adapters for OpenVMS and Tru64 UNIX Installation
Using the wwidmgr -set adapter command
Use the wwidmgr
-set adapter
command to format the HBA NVRAM and
to configure an HBA to run on a loop or a fabric.
The command format is:
wwidmgr -set adapter -item<itemno> -topo<fabric I loop>
The
itemno
bracketed value is the value from the
–show adapter
command.
You can change all HBAs from fabric to loop by specifying an
itemno
value of
9999.
In the following example,
init
is placed at the end to emphasize that the setting
in the running HBA is not changed until the next initialization.
