Installation
18
FCA2684/FCA2684DC PCI-X Host Bus Adapters for OpenVMS and Tru64 UNIX Installation
Prerequisites
■
PCI 32/64-bit data and 33/66 MHz clock frequency
■
PCI-X 64-bit data and 66/100/133 MHz clock frequency
■
32/64-bit addressing, 3.3V signaling (5V tolerant)
■
3.3V and 5V PCI power required for operation
■
Media and connectors
■
Multimode fiber optic cable with LC connector, used with short-wave lasers.
Set jumpers
lists the FCA2684/FCA2684DC jumper settings.The HBA has two
jumper blocks (JX1, JX2) that control the host adapter's device ID. The default
device ID is FA00.
See
on page 13 for detailed descriptions.
Table 3: Jumper settings
Device ID
Jumper Setting
FA00
JX1:1-2, JX2:2-3
1AE5
JX1:2-3, JX2:2-3
FA01
JX1:2-3, JX2:1-2