Installation
24
FCA2384 PCI-X Host Bus Adapter for OpenVMS and Tru64 UNIX Installation Guide
Verifying the Installation
To verify the HBA is properly installed and is operating:
1. Turn on the computer.
2. At power up, observe the POST LED indicators on the HBA. The position of
the POST LED indicators is defined in
Figure 1
and
Table 4
of this guide. The
green LED indicates power functions and the amber LED signifies port
activity. The amber LED blinks at all times during normal operation.
Table 5
lists normal indications.
Configuration Guidelines
The software for loading the driver also contains the default registry parameter
settings that are loaded as part of the driver installation. Consult the following
sources for any restriction and for information on supported configurations
specific to your operating system and topology.
■
Release Notes
■
HP Website at:
http://www.hp.com/country/us/eng/support.html
.
Table 5: Normal POST LED Indicator
Amber LED (L1)
Green LED (L2)
State
Flashing (irregular)
Off
POST processing in progress
Slow blink (1 Hz)
On
Normal—1 Gb link rate
Fast blink (4 Hz)
On
Normal—2 Gb link rate
Off
Blink (1 Hz)
Normal—link down or not yet
started
