QuickSpecs
hp StorageWorks ESL9595S2 tape library
DA-11436
World Wide — Version 5 — March 18, 2003
13
Technical Specifications
SCSI Identification
Product ID
ESL9000 Series
Vendor ID
HP
Control Panel
Library and Drive Status
Move tape cartridges
Load/Unload tape drives
Maintenance (drive cleaning, diagnostics)
Library Configuration
Statistics
SCSI Interface
Ultra2 SCSI LVD, 68HD Interconnect
(External cable length between library and HBA, limited to 10 m without LVD extender, extends up to 25 m when
using the LVD extender)
Form Factor
Free Standing
Unit
Packaged
Dimensions
Height
75 in/191 cm
80 in/203.2 cm
Width
60 in/152 cm
71 in/180.3 cm
Depth
29 in/75 cm
48 in/121.9 cm
Unit Weight
Without data cartridges, 0 drives 1444 lb/655 kg
SDLT drive in Hot Plug canister 13.5 lb/6.12 kg per drive
Without data cartridges, 2 drives 1471 lb/667.24 kg
1654 lb/750 kg
Without data cartridges, 16
drives
1660 lb/752.92 kg
1822 lb/826 kg
Performance
(native)
Minimum configuration
2 Hewlett-Packard SDLT 160/320 drives, 400/500/595 slots
Native transfer rates up to 115.2 GB/hr
Maximum configuration
16 Hewlett-Packard SDLT drives, 400/500/595 cartridge slots
Native backup performance up to 921.6 GB/hr
Supports 400/500/595 SDLT cartridges for native capacity of:
400 slots – 64 TB (128 TB at 2:1 compression)
500 slots – 80 TB (160 TB at 2:1 compression)
Storage Capacity
595 slots – 95.2 TB (190.4 TB at 2:1 compression)
Input/Output Port
Two 4 slot fixed
Initialization
(cartridge inventory)
time
< 5 minutes
Cartridge Swap Time
28 seconds average
Cartridge Swap Rate
>135 swap/hour
Cartridge Passthrough time -
end to end
78 seconds average
Electrical Specifications
AC Voltage
Auto-range to domestic and international AC voltages
AC Voltage Range: 90 to 132 VAC or 180 to 264 VAC, single phase
Nominal: 100 to 120 VAC or 220 to 240 VAC
Line Frequency Range: 47 to 63Hz
AC Receptacle: IEC-320 C19 Type 100-120V/200-240V, 50/60 Hz, 20A/16A (5-
20P plug for U.S. and Canada)
Power Consumption
VA Maximum 1,600W 5500 BTU/hr or 1400 Kcal/hr
