HP StorageWorks DLT80, Reference Manual

Page: 24 / 74

Installing an Internal DLT80 Tape Drive
24 DLT80 Tape Drive Reference Guide
Preparing the Server
To prepare the server for installation:
Caution: Electrostatic discharge (ESD) can damage electronic components. Be
sure you are properly grounded before beginning this procedure. See
Appendix B, "Electrostatic Discharge" for further information.
1. Perform a normal system shutdown.
2. Turn OFF the server and all peripheral devices.
3. Disconnect the AC main power cord from the outlet, then from the server and
from all peripheral devices.
4. Disassemble the system to expose the drive bay. Refer to the user manual that
came with your server.
Preparing the Tape Drive
Choose the right and left front panel labels from the labels provided in the kit.
Place them over the existing front panel.
Figure 6: Adhering the front labels
DLT