Ultrium 960, Ultrium 448, Ultrium 460, Ultrium 230, DLT VS80, SDLT 320
31
3.
Press
+
or
-
until the desired slot number displays on the LCD screen and press
Enter
. You are not
given the option to export from an empty slot, and you cannot export directly from the drive.
When
Remove Cartridge
displays on the LCD screen and the cartridge is ejected through the
mailslot, remove the exported cartridge from the autoloader and press
Enter
.
(See
4.
Repeat steps 3 and 4 as needed for any additional cartridges.
5.
Press
Cancel
when you have finished exporting cartridges.
6.
Check the LCD screen to verify that the desired slots no longer contain cartridges.
Figure 14
Exporting a cartridge
Bulk Exchange (Ultrium 960 and Ultrium 448 only)
This option allows you to import or export a specific number of cartridges and is useful if you want
to exchange a complete set of cartridges. Bulk Exchange operation starts with slot #1. If a cartridge
is available this cartridge will be exported. You must then import a new cartridge or move to the
next slot #2. The procedure is repeated for slot #2 to slot #8.
NOTE:
You must go offline to run Bulk Exchange and Import from the Commands menu. See ”
Loading tape cartridges
This option loads a cartridge from the autoloader slots into the tape drive. To use this option:
1.
Ultrium 960 and Ultrium 448:
From the Home Screen, press
+
or
-
until
Go Offline
displays
on the top line of the LCD screen. Press
Enter
to select. Press
+
or
-
until
Commands
displays on
the top line of the LCD screen.
Press
Enter
to select.
All other models:
From the Home Screen or Main menu, press
+
or
-
until
Commands
displays on
the top line of the LCD screen. Press
Enter
to select.
2.
Press
+
or
-
until
Load Cartridge
displays on the LCD screen. Press
Enter
to select.
3.
Press
+
or
-
until the desired slot number displays on the LCD screen and press
Enter
. The slot
number you select indicates the cartridge to be loaded into the tape drive.
NOTE:
Only slot numbers containing cartridges are displayed.
Summary of Contents for StorageWorks DLT VS80
