Setup 19
2.
Be sure the I/O modules or I/O blanks are fully seated and their handles are in the locked position.
The hard drive drawer does not open if I/O modules or I/O blanks are not fully seated with their
handles in the locked position.
WARNING:
TIP HAZARD! To reduce the risk of personal injury or damage to the equipment,
do not extend the hard drive drawers beyond the supporting surface when the unit is not
installed in a rack.
WARNING:
To reduce the risk of personal injury or damage to the equipment, ensure that
only one hard drive drawer is extended at a time.
WARNING:
To reduce the risk of personal injury or damage to the equipment, you must
adequately support the chassis during installation and removal. It is not secured to the rack
frame or mounted on rails.
3.
Extend the hard drive drawer.
WARNING:
Pinch hazard—Keep hands out of front and rear of chassis when closing hard
drive drawers.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the MDS600
for an extended period of time with the drawer open.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the MDS600
unless all bays are populated with either a component or a blank.