HP StorageWorks 2/140 - Director Switch, Service Manual

Page: 103 / 396

Diagnostics
103 Director 2/140 Service Manual
Figure 23: Discover Setup dialog box
2. Highlight the director to be reconfigured from the Available Addresses list,
and click Change. The Editing Domain Information dialog box displays, as
shown in
Figure 24 .
Figure 24: Editing Domain Information dialog box
3. Click Yes. The Domain Information dialog box displays with the IP Address
page open, as shown in Figure 25 .
Figure 25: Domain Information dialog box (IP Address page)
4. Enter the correct IP address in the IP Address field.
5. Click OK to save the new IP address, close the dialog box, and redefine the
director to the HAFM application.
6. Click OK to close the Discover Setup dialog box.