c.
Remove the hard drive bracket
(3)
from the hard drive.
The hard drive bracket, hard drive connector cable, and screws are available in the Hard
Drive Hardware Kit, spare part number 736884-001.
Reverse this procedure to install the hard drive.
Hinge assembly
NOTE:
The hinge assembly spare part kit includes two cables and two rubber feet.
Description
Spare part number
Hinge assembly (includes 2 cables and 2 rubber feet)
736885-001
Before removing the hinge assembly, follow these steps:
1.
Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base are
off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.
Disconnect the power from the tablet and keyboard base by unplugging the power cord from the
tablet and keyboard base.
3.
Disconnect the tablet from the keyboard base.
4.
Remove the bottom cover (see
Bottom cover on page 63
).
5.
Remove the keyboard base battery (see
Keyboard base battery on page 65
).
6.
Remove the audio /USB board (see
Audio/USB board on page 68
).
7.
Remove the power connector board (see
Power connector board on page 69
).
Removal and replacement procedures
73
