HP Spectre Folio Page 55 Maintenance And Service Manual Download

Page: 55 / 90

Disconnect the WLAN antenna cables (4) from the WLAN module built onto the system board.

NOTE:

The #1/white WLAN antenna cable connects to the WLAN module "#1/Main" terminal. The #2/

black WLAN antenna cable connects to the WLAN module "#2/Aux" terminal.

NOTE:

The rubber screw covers removed in the following step are different in size and shape. Make note

of which rubber screw cover was removed from which cavity.

Remove the rubber screw covers (1) that conceal the speaker assembly screws.

NOTE:

The rubber screw covers are included in the Mylar/Rubber/Tape Kit, spare part number

L38695-001.

Remove the two Phillips M2.0×3.4 screws (2) that secure the speaker assembly to the display back cover.

Component replacement procedures

Summary of Contents for Spectre Folio



























































































Search results

Summary of Contents for Spectre Folio

Reviews:

Related manuals for Spectre Folio

Brands by name

Popular brands

HP Spectre Folio, Maintenance And Service Manual

Search results

Summary of Contents for Spectre Folio

Reviews:

Related manuals for Spectre Folio

Brands by name

Popular brands