Audio jack board
NOTE:
The audio jack board spare part kit does not include the audio jack board cable. The audio jack board
cable is available using spare part number 941844-001.
Description
Spare part number
Audio jack board
941843-001
Before removing the audio jack board, follow these steps:
1.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
2.
Disconnect all external devices from the computer.
3.
Remove the bottom cover (see
), and then remove the following components:
a.
Battery (see
b.
Fans (see
)
c.
System board (see
)
d.
Left speaker (see
)
Remove the audio jack board:
1.
Remove the Phillips M2.0×3.2 screw (1) that secures the audio jack board to the keyboard/top cover.
2.
Lift the front edge of the audio jack board (2) until it rests at an angle.
3.
Remove the audio jack board (3) by sliding it up and forward at an angle.
Reverse this procedure to install the audio jack board.
52
Chapter 5 Removal and replacement procedures
