HP Spectre 13 Maintenance And Service Manual Download

Page: 47 / 76

Remove the TouchPad (3) by sliding it up and back at an angle.

Reverse this procedure to install the TouchPad.

Fans

Description

Spare part number

Left fan (includes cable)

941827-001

Right fan (includes cable)

941828-001

Before removing the fans, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.

Remove the bottom cover (see

Bottom cover on page 30

Disconnect the battery cable from the system board (see

Battery on page 32

Remove the right fan:

Disconnect the right fan cables (1) from the connectors on the system board.

Remove the two Phillips M2.0×3.2 screws (2) that secure the right fan to the keyboard/top cover.

Component replacement procedures

Summary of Contents for Spectre 13













































































Search results

Summary of Contents for Spectre 13

Reviews:

Related manuals for Spectre 13

Brands by name

Popular brands

HP Spectre 13, Maintenance And Service Manual

Search results

Summary of Contents for Spectre 13

Reviews:

Related manuals for Spectre 13

Brands by name

Popular brands