Solid-state drive (SSD)
Description
Spare part number
512-GB mSATA, SSD
744380-001
256-GB mSATA, SSD
744379-001
128-GB mSATA, SSD
744378-001
Before removing the solid-state drive module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover on page 29
).
5.
Disconnect the battery.
Remove the solid-state drive:
1.
Remove the Phillips PM2.0×3.0 screw
(1)
that secures the drive to the computer. The rear of the
drive pops up.
30
Chapter 4 Removal and replacement procedures
