Connecting to a Novell NetWare 5.1 or 4.11 Server
Microsoft Windows 2000 Professional
Requirements
Operating System
Windows 2000 Professional
Driver Version
5.95.90.0 (Embedded in OS)
Driver File
MDGNDIS5.SYS
Server OS
NetWare 5.1 or 4.11 Server
Client OS
Client v4.80 for Windows NT/2000
Procedure
1. With the HP Vectra turned off, install the network adapter into an available PCI
slot.
2. Connect the network cable to the newly installed network adapter.
3. Connect the WOL cable between the network adapter and the PC motherboard.
4. Power on the machine and boot to Windows.
5. Logon to Windows with administrator privileges.
6. Windows will silently detect (i.e. without any messages or prompts) the network
adapter as “Madge Smart 16/4 PCI Ringnode Mk3” during start up and
automatically install its embedded driver.
7. From the Device Manager, under Network adapters, double-click on “Madge
Smart 16/4 PCI Ringnode Mk3” to open its Properties window. Click on the
“Power Management” tab and check “Allow this device to bring the computer out
of standby”.
8. Additional changes in the System or Local Area Connection properties, such as:
workgroup name, computer name, TCP/IP properties, etc. may be necessary.
Ask your Network Administrator for more information. After changes are made, a
restart may be necessary.
9. From the location of the “Novell Client v4.80 for Windows NT/2000” installation
files, execute “SETUPNW.EXE”.
10. Click on “Yes” to accept the “Novell Terms and Conditions”.
11. Select either “Typical” or “Custom” and click on “Install”. Typical Installation is
normally chosen. Select Custom Installation only if you are an administrator or an
advanced user. When prompted for options during installation, ask your Network
Administrator for more information.
