HP Smart Array P600, User Manual

Page: 22 / 64

22 HP Smart Array P600 Controller User Guide
You can now create another logical drive by repeating the previous steps.
NOTE: Newly created logical drives are invisible to the operating
system. To make the new logical drives available for data storage,
format them using the instructions given in the operating system
documentation.
Using ACU
For detailed information about using ACU, refer to the HP Array Configuration
Utility User Guide. This document is available on the Documentation CD that is
provided in the controller kit .
Using CPQONLIN
The NetWare Online Array Configuration Utility (CPQONLIN) is an NLM that
enables you to configure drive arrays on a NetWare server without powering
down the server or storage system. CPQONLIN also provides information about
the status of drives attached to the controller.
To run CPQONLIN:
1. Use the software CD provided with the controller to load the drivers
(
HPQCISS.HAM and CPQSHD.CDM ) and the executable
( CPQONLIN.NLM ) on the server. Detailed instructions are provided with the
CD.
2. Enter
cpqonlin
at the console prompt.
3. Use the arrow keys to highlight the Array Configuration Utility menu item,
and then press the
Enter key.
4. From the list of controllers that is presented, select the one that you want to
configure.
–
If there are no logical drives connected to the controller, an auto-
configuration wizard opens and prompts you for fault-tolerance
information.