manualshive.com logo in svg

HP SlateBook PC, Maintenance And Service Manual

Share
Download
HP SlateBook PC Maintenance And Service Manual Download Page 25

6.

Remove the thirteen Phillips PM1.9×5.7 screws that secure the keyboard/top cover to the

base enclosure.

7.

Turn the computer right side up.

8.

Open the computer as far as it will open.

9.

Detach the front edge of the keyboard/top cover 

(1)

 from the base enclosure.

10.

Lift the keyboard/top cover 

(2)

 until it rests at an angle.

11.

Disconnect the battery cable 

(3)

 from the system board.

12.

Release the zero insertion force (ZIF) connector 

(4)

 to which the power button board cable is

attached, and then disconnect the power button board cable from the system board.

13.

Release the ZIF connector 

(5)

 to which the keyboard cable is attached, and then disconnect the

keyboard cable from the system board.

14.

Release the ZIF connector 

(6)

 to which the TouchPad board cable is attached, and then disconnect

the TouchPad board cable from the system board.

Keyboard/top cover

19

Summary of Contents for SlateBook PC























































Reviews:

No comments

Brands by name

Popular brands

Load more brands