HP SlateBook 10 x2 Maintenance And Service Manual Download

Page: 53 / 58

Factory data reset

To reset all settings and delete all data on the device:

To access Settings, touch the

All apps

icon, and then touch

Settings

Under

PERSONAL

, touch

Back up & reset

Under

PERSONAL DATA

, select

Factory data reset

, and then follow the on-screen

instructions.

Android system recovery mode

Press the power button, and then touch

Power off

Press the power button and the volume down button at the same time.

Press the volume up or volume down button to advance through the options, and then press the
power button to select one of the following options:

●

Reboot system now

●

Apply update from SD card

●

Wipe data/factory reset

●

Wipe cache partition

●

Reboot into fastboot mode

Factory data reset

Summary of Contents for SlateBook 10 x2



























































Search results

Summary of Contents for SlateBook 10 x2

Reviews:

Related manuals for SlateBook 10 x2

Brands by name

Popular brands

HP SlateBook 10 x2, Maintenance And Service Manual

Search results

Summary of Contents for SlateBook 10 x2

Reviews:

Related manuals for SlateBook 10 x2

Brands by name

Popular brands