3.
Disconnect all external devices from the tablet.
4.
Remove the display enclosure (see
Display enclosure on page 20
), and then remove the
following components:
a.
Rear webcam (see
Rear webcam on page 21
)
b.
Front webcam (see
Front webcam on page 23
)
c.
Display panel cable (see
Display panel cable on page 24
)
d.
Wireless antenna (see
Wireless antenna on page 25
)
e.
Power button board (see
Power button board on page 26
)
f.
Volume button board (see
Volume button board on page 28
)
g.
TouchScreen cable (see
TouchScreen cable on page 29
)
h.
Battery (see
Battery on page 30
)
Remove the bezel:
1.
Remove the two Phillips PM2.0×2.5 screws
(1)
and the three Phillips PM2.0×4.5 screws
(2)
that
secure the bezel to the display assembly.
2.
Remove the bezel
(3)
from the display assembly.
Reverse this procedure to install the bezel.
32
Chapter 4 Removal and replacement procedures preliminary requirements
