Remove the rear-facing webcam:
1.
Disconnect the rear-facing webcam cable from the system board.
2.
Remove the rear-facing webcam and cable.
Reverse this procedure to install the rear-facing webcam.
Vibrator module
Description
Spare part number
Vibrator module (includes cable and double-sided adhesive)
775649-001
Before removing the vibrator module, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the top and bottom covers (see
Top and bottom covers on page 15
).
5.
Remove the display panel assembly (see
Display panel assembly on page 16
6.
Remove the system board (see
Remove the vibrator module:
1.
Detach the vibrator module cable
(1)
from the back cover. (The vibrator module cable is attached
to the back cover with double-sided adhesive.)
30
Chapter 5 Removal and replacement procedures
Summary of Contents for SLATE 8 PLUS
Page 4: ...iv Safety warning notice ...
