Rear-facing webcam
Description
Spare part number
Rear-facing webcam (8.0-MP, auto-focus, with flash; includes cable and double-sided adhesive)
789611-001
Before removing the rear-facing webcam, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 13
).
5.
Remove the battery (see
Battery on page 14
).
6.
Remove the middle frame (see
Middle frame on page 16
).
Remove the rear-facing webcam:
1.
Disconnect the rear-facing webcam cable (1) from the system board.
2.
Detach the rear-facing webcam (2) from the display panel assembly. (The rear-facing webcam is
attached to the display panel assembly with double-sided adhesive.)
3.
Remove the rear-facing webcam and cable.
Reverse this procedure to install the rear-facing webcam.
18 Chapter 5 Removal and replacement procedures
