HP Slate 6 VoiceTab Plus Maintenance And Service Manual Download Page 14

Page: 14 / 38

Sequential part number listing

Spare part number

Description

743820-001

10-W, wall-mount, USB, AC adapter, non-PFC

744423-008

10-W, 5.3-V/2-A, USB, AC adapter with duck head for use in North America

744423-009

10-W, 5.3-V/2-A, USB, AC adapter with duck head for use in Europe

751600-001

USB extension cable

751655-001

Battery (3000-mAh, includes cable)

751659-001

Screw Kit

788634-001

Back cover

788635-001

Middle frame

788636-001

HP Slate 6 VoiceTab Plus Tablet equipped with a Qualcomm MSM8926 1.20-GHz quad core

processor (SoC), graphics subsystem with UMA memory, 1.0-GB LPDDR3 system memory, and

16-GB eMMC hard drive, and a 6.0-in, (1280×720), LCD, 5-point capacitive TouchScreen,

bonded, full lamination, OGS, display panel assembly for use in North America

788636-161

HP Slate 6 VoiceTab Plus Tablet equipped with a Qualcomm MSM8926 1.20-GHz quad core

processor (SoC), graphics subsystem with UMA memory, 1.0-GB LPDDR3 system memory, and

16-GB eMMC hard drive, and a 6.0-in, (1280×720), LCD, 5-point capacitive TouchScreen,

bonded, full lamination, OGS, display panel assembly for use in Latin America

788637-001

Display panel assembly (6.0-in, (1280×720), LCD, 5-point capacitive TouchScreen, bonded, full

lamination, OGS; includes display panel cable and TouchScreen cable)

788638-001

System board equipped with a Qualcomm MSM8926 1.20-GHz quad core processor (SoC),

graphics subsystem with UMA memory, 1.0-GB LPDDR3 system memory, and 16-GB

eMMC hard drive (includes top speaker, which includes double-sided adhesive)

789610-001

Front-facing webcam (2.0-MP, fixed-focus; includes cable)

789611-001

Rear-facing webcam (8.0-MP, auto-focus, with flash; includes cable and double-sided adhesive)

790366-001

Antenna board (includes RF cable)

790367-001

Button Actuators Kit (includes power button actuator and volume button actuator)

790368-001

Headset

790369-001

Ambient light sensor board (includes cable and double-sided adhesive)

790370-001

Speaker (bottom, includes vibrator module and cables)

791170-001

SIM (TMO 3FF)

Chapter 3 Illustrated parts catalog

Summary of Contents for Slate 6 VoiceTab Plus







































Search results

Summary of Contents for Slate 6 VoiceTab Plus

Reviews:

Related manuals for Slate 6 VoiceTab Plus

Brands by name

Popular brands

HP Slate 6 VoiceTab Plus, Maintenance And Service Manual

Search results

Summary of Contents for Slate 6 VoiceTab Plus

Reviews:

Related manuals for Slate 6 VoiceTab Plus

Brands by name

Popular brands