2.
Plug the other end of the network cable into a network wall jack
(2)
or router.
NOTE:
If the network cable contains noise suppression circuitry
(3)
, which prevents
interference from TV and radio reception, orient the circuitry end of the cable toward the all-in-
one.
3.
Select the All Apps icon from the Home screen, and then select
Settings
.
NOTE:
The apps on the screen are arranged alphabetically.
4.
Select
Ethernet configuration
.
5.
Select the
ON
button.
6.
Select
Obtain IP Address Automatically (DHCP)
or
Configure IP Address Manually
.
7.
Next to Proxy settings, select
None
, and then select
Manual
.
8.
Manually enter the
Proxy settings
.
9.
Select the
Save
button.
Using Bluetooth
The all-in-one includes Bluetooth capability, which creates a personal area network (PAN) to connect
to other Bluetooth enabled devices such as computers, phones, printers, headsets, speakers, and
cameras. In a PAN, each device communicates directly with other devices, and devices must be
relatively close together—typically within 10 meters (approximately 33 feet) of each other.
To pair a Bluetooth device:
1.
To connect to a Bluetooth device, turn on the Bluetooth device.
2.
Select the All Apps icon from the Home screen, and then select
Settings
.
NOTE:
The apps on the screen are arranged alphabetically.
3.
Select
Bluetooth
.
4.
Select the
ON
button.
5.
Select your device name to make it visible to all nearby Bluetooth devices.
18
Chapter 2 Setting up the hardware
Summary of Contents for Slate 21 Pro
Page 1: ...HP Slate 21 Pro All in One User Guide ...
Page 4: ...iv About This Guide ...
Page 8: ...viii ...
