HP Slate 10 Plus, Maintenance And Service Manual

Page: 33 / 40

3. Remove the front-facing webcam (2) and cable.
Reverse this procedure to install the front-facing webcam.
Display panel cable
Description Spare part number
Display panel cable (includes double-sided adhesive) 776021-001
Before removing the display panel cable, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the display panel assembly (see Display panel assembly on page 15 ).
5. Remove the connector board (see Connector board on page 19 ).
6. Disconnect the battery cable from the system board (see Battery on page 20 ).
7. Remove the left and right speaker connector boards (see Speaker connector boards on page 21 ).
8. Remove the system board (see System board on page 25 ).
Remove the display panel cable:
1. Turn the system board upside down, with the front-facing webcam toward you.
2. Release the ZIF connector (1) to which the display panel cable is attached.
Display panel cable 27