HP Slate 10 Plus, Maintenance And Service Manual

Page: 32 / 40

2. Remove the system board (2) .
Reverse this procedure to install the system board.
Front-facing webcam
Description Spare part number
0.3-MP front-facing webcam (includes cable) 776023-001
Before removing the front-facing webcam, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the display panel assembly (see Display panel assembly on page 15 ).
5. Remove the connector board (see Connector board on page 19 ).
6. Disconnect the battery cable from the system board (see Battery on page 20 ).
7. Remove the left and right speaker connector boards (see Speaker connector boards on page 21 ).
8. Remove the system board (see System board on page 25 ).
Remove the front-facing webcam:
1. Turn the system board upside down, with the front-facing webcam toward you.
2. Disconnect the front-facing webcam cable (1) from the system board.
26 Chapter 5 Removal and replacement procedures