Antenna board
Description
Spare part number
Antenna board
727662-001
Before removing the antenna board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the rear cover (see
Rear cover on page 14
).
5.
Remove the battery (see
Battery on page 16
).
Remove the USB connector:
▲
Detach the antenna board from the display assembly. (The antenna board is attached to the
display assembly with double-sided adhesive.)
Reverse this procedure to install the antenna board.
24
Chapter 4 Removal and replacement procedures preliminary requirements
Summary of Contents for series 7
Page 1: ...HP Tablet 7 Maintenance and Service Guide ...
Page 4: ...iv Safety warning notice ...
Page 9: ...3 Illustrated parts catalog 3 ...
Page 41: ......
