HP ROM-Based Setup Utility User Manual Download Page 9

Page: 9 / 133

RBSU menu (HP ProLiant G6 servers or server blades) 9

RBSU menu (HP ProLiant G6 servers or server
blades)

RBSU menu overview

The RBSU menu lists configuration settings to view or modify.

IMPORTANT:

Menu options may differ from those in this document, depending on specific

server options.

On the right-hand side of the screen, a window displays basic server information, including the server

model, serial number, BIOS version, backup BIOS version, memory installed, and processors installed.

Pressing the F1 key when any sub-menu option is highlighted enables you to view a description of that

feature. While the menus are provided in various languages, the help text is provided in English only.

Summary of Contents for ROM-Based Setup Utility






































































































































Search results

Summary of Contents for ROM-Based Setup Utility

Reviews:

Related manuals for ROM-Based Setup Utility

Brands by name

Popular brands

HP ROM-Based Setup Utility, User Manual

Search results

Summary of Contents for ROM-Based Setup Utility

Reviews:

Related manuals for ROM-Based Setup Utility

Brands by name

Popular brands