RBSU menu (HP ProLiant G6 servers or server blades) 52
Clearing the TPM may prevent the server from booting to a TPM-aware operating system.
BIOS Serial Console/EMS Support (G6 servers)
IMPORTANT:
Some languages or characters may require a specific emulation mode.
The BIOS Serial Console/EMS Support option configures the serial port to view POST error messages and
runs RBSU remotely through a serial connection to the server COM port or iLO 2 Virtual serial port. The
remote server does not require a keyboard or mouse.
For more information about BIOS Serial Console, see the
BIOS Serial Console User Guide
on the
Documentation CD or the HP website (
http://www.hp.com/support/smartstart/documentation
).
BIOS Serial Console design supports VT100+ emulation. For more information, see "Command Line
Interface Overview (on page
119
)."
When viewed in BIOS Serial Console, the RBSU main menu looks slightly different from the local server
view.
The following menu options are available:
•
BIOS Serial Console Port (G6 servers) (on page
53
)
•
BIOS Serial Console Baud Rate (G6 servers) (on page
54
)
•
EMS Console (G6 servers) (on page
55
)
Summary of Contents for ROM-Based Setup Utility
