121
B
Working with Rational RequisitePro
This appendix describes notes and limitations specific to synchronizing
requirements between Quality Center and Rational RequisitePro.
This appendix includes:
Guidelines for Working with Rational RequisitePro
RequisitePro Connection Properties
Migrating to the Quality Center Synchronizer
Guidelines for Working with Rational RequisitePro
When working with the Synchronizer, make sure that you follow these
guidelines:
➤
Record creation will fail during synchronization if you use the following
characters when naming a requirement in Quality Center, or when naming
a project, package, or requirement in RequisitePro:
\ ^ * “ : ‘
➤
For synchronization with a RequisitePro project located on a network drive,
the user configured to log on as a service for the Synchronizer must have
permissions to access the network location.
➤
In Quality Center, if you want to move a requirement and make it a child of
another requirement, make sure that you move it under a requirement of
the same type. This is required because RequisitePro does not allow you to
place a requirement of one type under a requirement of another type.
➤
RequisitePro
Real
,
Time
, and
Userlist
type fields are defined as
String
type in
Synchronizer field mappings.
