10
Step5
Grasping the handle of the power supply with one hand, pull it
part way out. Supporting the power supply bottom with the
other hand, pull the power supply slowly along the guide rails
out of the slot.
NOTE:
Put the power supply into an antistatic bag after removal.
Connecting the power cord
After you insert the power supply into the device, you can connect the
power cord. For a device using the PSR750-A power supply, use an AC
power cord to connect the power source.
Follow these steps to connect the power cord for the PSR750-A power
supply:
Step1
Switch off the AC power supply, that is, turn the power switch of
the power supply to the “O” position (see
).
Step2
Connect one end of the AC power cord shipped with the device
to the AC receptacle on the power supply (see
).
Step3
Connect the other end of the AC power cord to the power
source.
