7
•
Do not touch any naked wire or terminal. Doing so may result in a
personal injury.
•
Never place the power supply in wet locations and prevent fluid
from leaking into the power supply.
•
Do not often open the shell of the power supply to prevent damage
to the power supply. If a failure occurs on the internal wires or units,
contact the technical stuff to troubleshoot the problem.
Tools
Prepare the following tools for installation and removal:
•
Flat-blade screwdriver
•
Phillips screwdriver
•
ESD-preventive wrist strap
Installing and removing the power supply
CAUTION:
Before installation and removal, make sure that the power supply is
switched off and no power cord is connected to the power supply.
Installing the power supply
Follow these steps to install the power supply:
Step1
Wear an ESD-preventive wrist strap, and make sure that the
wrist strap makes good skin contact and is well grounded.
Step2
Take the power supply from the package and check that the
input mode of the power supply is as required.