Commands description 6
Commands description
PPIC can only process one command at a time.
Help menu
-h
:
This command will display a summary of supported commands and options.
Display chassis power level and configuration
-d
:
This command will display the instantaneous power reading for the entire chassis:
1.
Total Chassis Power (AC): the sum of all power consumed by all present nodes and chassis subsystems.
2.
Set Power Configuration Mode for more information.
Poll chassis power level
-p -ffrequency -tduration
:
This command will poll the chassis status and configuration every
frequency
seconds for a total duration of
duration
seconds:
1.
Total Chassis Power (AC): the sum of all power consumed by all present nodes and chassis subsystems.
Enabling verbose mode (-v) will provide detailed information about the chassis power consumption.
Verbose
-v
:
This command will only affect the output of Display chassis power level and configuration and Poll chassis
power level. Enabling verbose will provide detailed information about the chassis power consumption:
1.
Maximum Chassis Power Available (AC): the total power supply capacity available in the chassis.
2.
Total Chassis Power (AC): the sum of all power consumed by all present nodes and chassis subsystems.
3.
Total Chassis Peak Power (AC): the highest calculated power value for the chassis since it was last
cleared.
4.
Total Chassis Peak Power (DC): the highest calculated power value for the chassis since it was last
cleared.
5.
Bay Power (DC): the instantaneous power consumption calculated at each bay. (
Example
: A 2U node
connected on bay 3 will have a total power consumption of bay 3 plus bay 4)
6.
Total Fan Power (DC): instantaneous fan power consumption of all active fans in the chassis.
