To quickly setup iLO 2 using the default settings for iLO 2 Standard and
iLO 2 Advanced features, follow the steps below
1.
Ensure that a network cable is connected to the iLO 2 port (1) located
on the back of the storage server.
gl0083
1
Figure 8 iLO 2 connector port
NOTE:
This connection method is easiest when the connection is
to a DHCP and DNS supported network.
2.
If not using dynamic DHCP (IP addressing), you will need to input a
static IP address by using the direct attach method and the iLO 2 RBSU.
3.
Using the methods described in the
HP Integrated Lights–Out 2 User
Guide
, connect to the iLO 2 port.
HP ProLiant ML350 G5 Storage Server
35
Summary of Contents for ProLiant ML350 G5
Page 12: ...12 About this guide ...
Page 18: ...18 Setup overview ...
Page 28: ...28 Installing the server ...
