Diagnostic Tools and Setup Utilities
3-6
HP ProLiant ML150 Generation 2 Server Maintenance and Service Guide
HP CONFIDENTIAL Codename: Stone Soup 2 Part Number: 368148-003 Last Saved On: 4/19/05 5:18 PM
Security Menu
Figure 3-3: Security menu of the BIOS Setup Utility
Use this menu to configure the following items:
•
Supervisor Password Is – Display if a Supervisor password is set.
•
User Password Is – Display if a User password is set.
•
Set Supervisor Password –Set the Supervisor password, which is required then to enter
the BIOS Setup Utility. Once the Supervisor password is set, the Supervisor can access
and change all fields in the BIOS Setup Utility screens.
•
Set User Password – Set the User password. The User password gives restricted access
to the setting options.
The Supervisor password must be set before setting the User password.
•
Password on boot – If a Supervisor password has been set, use this item to enable or
disable the requirement of the Supervisor password when booting the server.
NOTE: To set a new Supervisor or User password:
1.
Press the Enter key to enter a new password.
2.
A pop-up menu displays. Enter the password in the Enter New Password field and press the
Enter key.
3.
Enter the password again in the Confirm New Password field and press the Enter key.
4.
A pop-up menu displays, indicating that the changes have been saved. Press the Enter key. The
setting of the selected item has been changed to Set.
5.
Select Exit Saving Changes from the Exit menu and press the Enter key (or press the F10 key) to
save the change and exit the BIOS Setup Utility.
6.
In the confirmation pop-up menu, select Yes and press the Enter key.
