HP ProLiant DL80 Gen9, Maintenance And Service Manual

Page: 55 / 124

Removal and replacement procedures 55
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page 27 ).
o
Remove the server from the rack (on page 29 ).
4.
Remove the access panel (" Access panel " on page 34 ).
5.
If you are removing an expansion board installed in the primary PCI riser cage, remove the riser cage
("
Remove the PCI riser cages " on page 30 ).
6.
Disconnect any internal cables that are connected to the expansion board.
7.
Remove the expansion board.
o
Expansion board removal from an onboard expansion slot
o
Expansion board removal from the two-slot PCI riser cage