HP ProLiant DL380 Gen9, User Manual

Page: 29 / 215

Operations 29
2.
Open the cable management arm. The cable management arm can be right-mounted or
left-mounted.
Remove the fan cage
To remove the component:
1.
Power down the server (on page 26 ).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page 26 ).
o
Remove the server from the rack (on page 27 ).
4.
Remove the access panel (on page 27 ).
5.
Remove the fan cage.