OS Support
OS Support
OS Support
OS Support
Microsoft Windows Server 2000
Microsoft Windows Server 2003
Novell NetWare
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
SCO UnixWare, OpenServer
VMware Virtualization Software
NOTE:
NOTE:
NOTE:
NOTE: For more complete and up-to-date information on how to buy server operating systems from HP
please visit the OS product site at:
http://h18004.www1.hp.com/products/servers/software/OEM.html
.
NOTE:
NOTE:
NOTE:
NOTE: For a more complete and up-to-date listing of supported OSs and versions, please visit our OS
Support Matrix at:
http://www.hp.com/go/supportos
.
NOTE:
NOTE:
NOTE:
NOTE: For an up-to-date listing of the latest drivers available for the HP ProLiant DL380 G4, please
see:
http://h18023.www1.hp.com/support/files/server/us/index.html
.
NOTE:
NOTE:
NOTE:
NOTE: For more Linux OS support & certification information, please visit our the ProLiant &
Bladesystem Server Linux matrix
http://h18004.www1.hp.com/products/servers/linux/hpLinuxcert.html
NOTE:
NOTE:
NOTE:
NOTE: For more information on HP's Certified and Supported ProLiant Servers, please visit the VMware
Server Support Matrix at:
http://h18004.www1.hp.com/products/servers/software/vmware/hpvmwarecert.html
.
Rack Airflow
Rack Airflow
Rack Airflow
Rack Airflow
Requirements
Requirements
Requirements
Requirements
Rack 10000 series Cabinets
Rack 10000 series Cabinets
Rack 10000 series Cabinets
Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum
cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION:
CAUTION:
CAUTION:
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you
must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom
to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack
must be a minimum of 2.75 inches (7 cm).
CAUTION:
CAUTION:
CAUTION:
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
NOTE:
NOTE:
NOTE:
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD
provided with the server, or to the server documentation located in the Support section at the following
URL:
http://h18000.www1.hp.com/products/servers/proliantdl380/index.html
.
QuickSpecs
HP ProLiant DL380 Generation 4 (G4)
HP ProLiant DL380 Generation 4 (G4)
HP ProLiant DL380 Generation 4 (G4)
HP ProLiant DL380 Generation 4 (G4)
Standard Features
DA - 12028 Worldwide — Version 58 — February 12, 2007
Page 10
