HP ProLiant DL365 Quickspecs Download Page 11

Page: 11 / 43

Rack Airflow

Rack Airflow
Requirements

Requirements

Rack 10000 series Cabinets

Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum
cooling, allowing these racks to be fully loaded with servers using the latest processors.

CAUTION:

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
adequate airflow and to prevent damage to the equipment:

Front and rear doors: If your 42U server rack includes closing front and rear doors, you must
allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit
adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be
a minimum of 2.75 inches (7 cm).

CAUTION:

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
NOTE:

NOTE:

NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD
provided with the server, or to the server documentation located in the Support section at the following
URL:

www.hp.com/servers/dl365

Rack Kit

The HP ProLiant DL365 has universal sliding rails which provide tool-free support for square and round
holes rack (including Compaq/HP 7000, 9000, 10000 and HP/E and H9 series), with an adjustment
range from 24 ¾" - 36" depth.

Telco Rack Support

Support for all 2-post Telco racks requires an additional option kit from Rack Solutions. The Rack
Solutions brackets can be purchased at:

http://www.racksolutions.com/hp

Factory Express Portfolio

Factory Express Portfolio
for Servers and Storage

for Servers and Storage

HP Factory Express offers configuration, customization, integration and deployment services for HP
servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.

For more information on Factory Express services for your specific server model please contact your sales
representative or go to

http://www.hp.com/go/factory-express

QuickSpecs

HP ProLiant DL365

Standard Features

DA - 12564 Worldwide — Version 31 — September 15, 2008

Page 11