30
HP ProLiant DL360 Generation 4 Server Maintenance and Service Guide
5. Remove the component from the server.
To replace the component, reverse the removal procedure.
Optical Device and Diskette Drive Interface
1. Power down the server ("Powering Down the Server" on page
16
).
2. Remove all hard drives and hard drive blanks ("Hard Drive" on page
21
).
3. Eject the optical device ("Optical Device" on page
25
).
4. Extend or remove the server from the rack ("Extending the Server from the
Rack" on page
17
).
5. Remove the access panel ("Removing the Access Panel" on page
18
).
6. Remove the diskette drive ("Diskette Drive" on page
23
).
7. Disconnect the cable from the optical device and diskette drive interface
board.
8. Use a T-15 Torx screwdriver to remove the two screws securing the board to
the server chassis.
Summary of Contents for ProLiant DL360 Generation 4
