HP 7.3kVA 32A Single Phase INTL Core Intelligent Modular Power Distribution Unit
AF52
HP 11kVA 16A Three Phase INTL Core Intelligent Modular Power Distribution Unit
AF52
HP 11.4kVA 16A 415V Three Phase L22-20 NA/JP Core Intelligent Power
Distribution Unit
AF90
HP 17.3kVA 24A 415V Three Phase L22-30 NA/JP Core Intelligent Power
Distribution Unit
AF90
HP 17.3kVA 24A 415V Three Phase IEC309 NA/JP Core Intelligent Power
Distribution Unit
AF90
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13650_div/13650_div.html
(Worldwide)
HP Rack Series
HP Rack 10000 G2 Series (Carbon/Graphite Metallic)
HP 10642 G2 1200mm deep Shock Rack
AF09
HP 10647 G2 1200mm deep Shock Rack
AF09
HP 10642 G2 Pallet Universal Rack
AF00
HP 10642 G2 Shock Universal Rack
AF00
NOTE: It is mandatory to use a shock pallet when shipping racks with equipment
installed.
NOTE: Please see the Rack 10000 G2 QuickSpecs for Technical Specifications
such as height, width, depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html
(Worldwide)
NOTE: For additional information regarding Rack Cabinets, please see the following
URL:
http://www.hp.com/go/rackandpower
.
NOTE: The increasing power of new high-performance processor technology
requires increased cooling efficiency for rack-mounted servers. The 10000 G2 Series
Racks provide enhanced airflow for maximum cooling, allowing these racks to be
fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements
to ensure adequate airflow and to prevent damage to the equipment:
•
Front and rear doors: If your 42U server rack includes closing front and rear
doors, you must allow 830 square inches (5,350 sq cm) of hole evenly
distributed from top to bottom to permit adequate airflow (equivalent to the
required 64 percent open area for ventilation).
•
Side: The clearance between the installed rack component and the side
panels of the rack must be a minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels to fill all remaining empty front panel U-
spaces in the rack. This arrangement ensures proper airflow. Using a rack without
blanking panels results in improper cooling that can lead to thermal damage.
NOTE: HP ProLiant DL rack models have fixed rails which provide support for racks
