HP ProLiant DL165 G7, Maintenance And Service Manual, Page: 86 / 118

Removal and replacement procedures 86
Power supply unit (PSU)
Located on the rear panel of the server power supply is a standard autoranging 750 W or 500 W
non-hot-plug PSU.
Figure 78
Hot-plug Power Supply Unit
To remove the hot-plug power supply:
1.
Press the purple tab.
2.
Pull the hot-plug power supply out of the power supply bay
Figure 79
Removing the Hot-plug Power Supply
To reinstall the hot-plug power supply:
1.
Align the hot-plug power supply cage connector with the open power supply bay and slide the
power supply into the chassis.
2.
Push it in until the locking tab is clicked.