NOTE:
NOTE:
NOTE:
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
Factory Integrated Model product offerings and requirements.
NOTE:
NOTE:
NOTE:
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a Factory Integrated Model (CTO) Blade.
NOTE:
NOTE:
NOTE:
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Step 1: Base Server Blade Configuration (Select a configurable Blade)
HP Models
HP Models
HP Models
HP Models
HP ProLiant BL620c G7 Configure-to-order Server
NOTE:
NOTE:
NOTE:
NOTE: This server supports the Intel Xeon 6500/7500 series processors.
600332-B21
HP ProLiant BL620c G7 Configure-to-order Server
NOTE:
NOTE:
NOTE:
NOTE: This server supports the Intel Xeon E7-2800/8867L series processors.
643786-B21
Configurable model ships with:
Configurable model ships with:
Configurable model ships with:
Configurable model ships with:
Four (4) integrated HP NC553i 10Gb FlexFabric adapter ports supporting
10Gb/1Gb autosensing Ethernet, FCoE, Flex-10, TCP/IP offload engine, hardware-
based accelerated iSCSI, and iSCSI boot
One (1) 10/100 network adapter port dedicated to iLO 3 Management
One (1) Integrated SAS version 2.0 (6Gb) HP Smart Array P410i Controller with RAID
0 and 1
NOTE:
NOTE:
NOTE:
NOTE: The P410i is configured with no cache allowing the end user to select the
desired cache option (if cache is desired in the first place).
NOTE:
NOTE:
NOTE:
NOTE: RAID 0 and 1 are supported on the P410i without the need for a cache
option.
Two (2) cache slots for BBWC and/or FBWC battery options.
NOTE:
NOTE:
NOTE:
NOTE: The server supports up to a combined total of two (2) battery cache options
for the P410i and/or optional Smart Array RAID controllers.
Two (2) small form factor hot-plug SAS/SATA/SSD hard drive bays
Three (3) I/O expansion slots
One (1) integrated Lights-Out 3
Integrated USB, MicroSDHC, and TPM connectors
Step 2: Choose Required Options (one of the following from each list unless otherwise
Step 2: Choose Required Options (one of the following from each list unless otherwise
Step 2: Choose Required Options (one of the following from each list unless otherwise
Step 2: Choose Required Options (one of the following from each list unless otherwise
noted):
noted):
noted):
noted):
HP Processors
HP Processors
HP Processors
HP Processors
NOTE:
NOTE:
NOTE:
NOTE: The BL620c G7 supports one or two processors.
NOTE:
NOTE:
NOTE:
NOTE: The minimum processor configuration is one processor that must be installed
in socket CPU1.
NOTE:
NOTE:
NOTE:
NOTE: All processors within the server must be identical.
NOTE:
NOTE:
NOTE:
NOTE: All Configure-to-Order processor kits contain one (1) processor.
NOTE:
NOTE:
NOTE:
NOTE: If two processors are desired, select one xxxxxx-L21 kit and one xxxxxx-B21 kit.
Ten-Core Processors
Ten-Core Processors
Ten-Core Processors
Ten-Core Processors
HP BL620c G7 Intel® Xeon® E7-2870 (2.40GHz/10-core/30MB/130W) FIO
Processor Kit
643749-L21
HP BL620c G7 Intel® Xeon® E7-2860 (2.26GHz/10-core/24MB/130W) FIO
Processor Kit
643751-L21
HP BL620c G7 Intel® Xeon® E7-2850 (2.0GHz/10-core/24MB/130W) FIO
Processor Kit
643753-L21
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade
HP ProLiant BL620c Generation 7 (G7) Server Blade
HP ProLiant BL620c Generation 7 (G7) Server Blade
HP ProLiant BL620c Generation 7 (G7) Server Blade
Configuration Information - Factory Integrated Models
DA - 13747 Worldwide — Version 16 — September 26, 2011
Page 20