Hardware options installation 36
CAUTION:
Any attempt to remove an installed TPM from the system board breaks or disfigures
the TPM security rivet. Upon locating a broken or disfigured rivet on an installed TPM,
administrators should consider the system compromised and take appropriate measures to
ensure the integrity of the system data.
5.
Install the TPM board. Press down on the connector to seat the board ("
System board components
"
on page
7
).
6.
Install the TPM security rivet by pressing the rivet firmly into the system board.
7.
Install the access panel (on page
13
).
8.
Install the server blade ("
Installing a server blade
" on page
17
).
9.
Power up the server blade (on page
11
).
Retaining the recovery key/password
The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after
BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery