Hardware options installation 40
•
Any attempt to remove an installed TPM from the system board breaks or disfigures the TPM security
rivet. Upon locating a broken or disfigured rivet on an installed TPM, administrators should consider the
system compromised and take appropriate measures to ensure the integrity of the system data.
•
When using BitLocker™, always retain the recovery key/password. The recovery key/password is
required to enter Recovery Mode after BitLocker™ detects a possible compromise of system integrity.
•
HP is not liable for blocked data access caused by improper TPM use. For operating instructions, see the
encryption technology feature documentation provided by the operating system.
Installing the Trusted Platform Module board
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
1.
Power down the server blade (on page
12
).
2.
Remove the server blade (on page
13
).
3.
Place the server blade on a flat, level work surface.
4.
Remove the access panel (on page
14
).
5.
Remove all hard drives ("
Hard drive option
" on page
21
).
6.
Remove the hard drive backplane.
7.
Remove the two T-15 screws from the front panel/hard drive cage assembly.
