Installing the Server Blade and Options
4.
Place the server blade on a flat, level surface.
5.
Remove the access panel:
a.
Lift up on the hood latch handle until the access panel disengages from the
chassis (1).
b.
Slide the access panel about 1.3 cm (1/2 inch) toward the rear of the unit and
lift the panel to remove it (2).
Figure 1-4: Removing the access panel
To replace the access panel, reverse step 5.
1-6
HP ProLiant BL40p Server Blade Setup and Installation Guide
HP CONFIDENTIAL
Writer: Amy Clute File Name: b-ch1 Installing the Server Blade and Options.doc
Codename: Black Ice Part Number: 307153-002 Last Saved On: 11/11/03 2:29 PM
