Removal and Replacement Procedures
Smart Array 5i Plus Controller Module
To remove the Smart Array 5i Plus Controller module:
1. Power down the server blade and remove it from the server blade enclosure. Refer to the
“Server Blade Preparation” section in this chapter.
2. Remove the access panel. Refer to the “Access Panel” section in this chapter.
3. Turn the standoffs one-quarter turn counterclockwise (1).
4. Grasp the front and back of the module, near the connectors, and lift the module (2).
Figure 2-18: Removing the Smart Array 5i Plus Controller module
Reverse steps 1 through 4 to replace the Smart Array 5i Plus Controller module.
2-18
HP ProLiant BL20p Generation 2 Server Blade Maintenance and Service Guide
HP CONFIDENTIAL
Codename: Part Number: 316078-001 Last Saved On: 4/3/03 1:22 PM
