Removal and Replacement Procedures
CAUTION:
Always populate server blade enclosure bays with either a server blade or server
blade blank. Operating the enclosure without a server blade or server blade blank results in
improper airflow and improper cooling that can lead to thermal damage.
Reverse steps 1 through 3 to install and power up a server blade. Server blades are set to
power up automatically upon insertion. If you have changed this setting, use the Power
On/Standby button or iLO Virtual Power Button feature to power up the server blade.
For more information about iLO, refer to the
Integrated Lights-Out User Guide
.
Access Panel
To remove the access panel:
1. Power down the server blade and remove it from the server blade enclosure. Refer to the
“Server Blade Preparation” section in this chapter.
2. Loosen the thumbscrew (1).
3. Press down on the thumb indentations, slide the access panel toward the rear of the unit
about 1.25 cm (0.5 in), and lift to remove the panel (2).
Figure 2-3: Removing the server blade access panel
Reverse steps 1 through 3 to replace the access panel.
2-6
HP ProLiant BL20p Generation 2 Server Blade Maintenance and Service Guide
HP CONFIDENTIAL
Codename: Part Number: 316078-001 Last Saved On: 4/3/03 1:22 PM
