Removal and Replacement Procedures
2-16
HP ProLiant BL20p Generation 3 Server Blade Maintenance and Service Guide
Smart Array 6i 128-MB Battery Backed Write Cache Enabler
To remove the 128-MB Battery-Backed Write Cache Enabler:
1.
Power down the server blade and remove it from the server blade enclosure. Refer to the
“Server Blade Preparation” section in this chapter.
2.
Remove the access panel. Refer to the “Access Panel” section in this chapter.
3.
Remove the Smart Array 6i Controller from the server blade. Refer to the “Smart Array
6i Controller” section in this chapter.
CAUTION:
Disconnecting the battery module will cause any unsaved data in the memory
module to be lost.
4.
Remove the 128-MB Battery-Backed Write Cache Enabler from the Smart Array 6i
Controller.
Figure 2-14: Removing the 128-MB Battery-Backed Write Cache
Enabler from the Smart Array 6i Controller
To replace the component, reverse the removal procedure.
